Flirting with the Flute
A flute is a musical instrument that produces sound when a stream of air is directed against the edge of a hole, causing the air within the body of the instrument to vibrate. Most flutes are tubular, but some are globular or other shapes. Some flutes are played by blowing air into a mouthpiece, which directs the air against the edge of a hole elsewhere in the flute.
These instruments, known as whistle flutes, include the tubular recorder and the globular ocarina. Other flutes are played by blowing air directly against the edge of the hole.
Some flutes are held vertically and are played by blowing air against the edge of a hole in the end of the flute. These instruments include Japanese bamboo flutes and the panpipe. The panpipe, also known as the syrinx, consists of several vertical flutes of various sizes joined together. Other flutes are held horizontally, and are played by blowing air against the edge of a hole in the side of the flute. These instruments, known as transverse flutes, include the modern flute used in orchestras.
Flutes have existed since prehistoric times. A fragment of a cave bear thigh bone containing two holes, discovered in Slovenia in 1995, is believed by some scientists to be part of a flute used by Neanderthals more than 43,000 years ago.
Flutes were used by the Sumerians and Egyptians thousands of years ago. Some ancient Egyptian flutes have survived, preserved in tombs by the arid desert climate. This Egyptian instrument was a vertical flute, about one yard (0.9 m) long and about 0.5 in (1.3 cm) wide, with between two to six finger holes. Modern versions of this flute are still used in the Middle East today.
The ancient Greeks used panpipes, probably indirectly influenced by more sophisticated Chinese versions. The transverse flute was used in Greece and Etruria by the second century B.C. and later appeared in India, China, and Japan. Flutes almost disappeared from Europe after the fall of the Roman Empire, until the Crusades brought Europeans into contact with the Arabs. Vertical flutes spread from the Middle East to Europe, and are still used in the Balkans and the Basque regions of Spain and France. Transverse flutes spread from the Byzantine Empire to Germany, then appeared in Spain and France by the fourteenth century.
During the Renaissance, transverse flutes consisted of wooden cylinders of various sizes, typically made of boxwood, with a cork stopper in one end and six finger holes. During the late seventeenth century, the Hotteterre family, noted French instrument makers, redesigned the transverse flute. Instead of a single cylinder, the flute consisted of a head joint, a body, and a foot joint. Modern flutes are still made in these three basic parts. The new flute also had a single key added, allowing more notes to be played. After 1720, the body was often divided into two parts of varying lengths, allowing the flute to be adjusted to play in various musical keys. By 1760, three more keys were added by London flutemakers, followed by two additional keys by 1780 and two more by 1800.
The transverse flute was completely redesigned in the middle of the nineteenth century by the German instrument maker Theobald Bohm. Bohm changed the position of the holes and increased their size. Because the new holes were impossible to reach with the fingers, new mechanisms were added to cover and uncover them as needed. The Bohm system is still used in modern transverse flutes.
Some modern flutes are made from wood that produces a different sound from metal flutes. These wooden flutes generally have metal keys and mechanisms.
Most flutes are made of metal. Less expensive flutes, intended for students, may be made from alloys of nickel and other metals. More expensive flutes may be plated with silver.
The pads attached to the surface of the keys in order to cover the holes are made of cork and felt. The springs that provide tension to hold the keys firmly against the holes may be made of steel, bronze, or gold. The pins and screws that hold the mechanism together are made of steel. The mouthpiece, containing the hole into which air is blown, may be made of the same metal as the rest of the flute, or it may be made of another metal, such as platinum.
Every flute is an individually crafted work of art. The flutemaker must consider the needs of the musician who will use the flute. Students need relatively inexpensive but reliable instruments. Professional musicians must have instruments of very high quality, often with special changes made in the keys to accommodate special needs.
The most individual portion of a flute is the head joint. Professional musicians often test several head joints before selecting one which produces the sound they prefer. Head joints are often manufactured to meet the special demands of individual musicians.
The material from which a flute is made greatly alters the sound which is produced. Wooden flutes produce a dark sound. Silver flutes produce a bright sound. The thickness of the metal used to make a flute also alters the sound it makes, as well as changing the weight of the instrument. All these factors may influence the design of a flute preferred by a particular musician.
A flute may be elaborately decorated. The physical appearance of a flute is an important consideration for professional musicians who perform in public. The most detailed designs are likely to found on the professional quality flutes. The process of forming these designs, known as chasing, requires the skill of an experienced artist, and makes the individual flute a truly unique instrument.
Credit: Flirting with the Flute